Encapsulation Resins

Meeting the challenge of challenging environments

Electrolube resins in use.
  • UL approved
  • Potting / encapsulating
  • Sealing and protection
  • Cable jointing
  • Coloured and optically clear
  • Bespoke and ex-stock

Resin systems are designed to protect and insulate printed circuit boards (PCBs) and electronic components from the threats of harsh and challenging environments, including; moisture, vibration, thermal or physical shock and general contamination. By encapsulating the entire device, resins can form a complete barrier against such environments offering superior performance under extreme conditions.

More info > Download product selector chart > Download product brochure >

Potting and encapsulation resins also offer excellent mechanical protection. Mechanical protection can be identified in a number of ways; superior performance is evident in applications involving prolonged exposure or immersion in harsh chemicals, or those exposed to vibrational, thermal or physical shock, for example. The higher level of protection is achieved through the mass of the resin surrounding the unit. This is different for every application however potting and encapsulating resins always provide a far more substantial covering than thatoffered by conformal coatings.

Due to the bulk of material surrounding the PCB, potting and encapsulation resins are commonly two-part systems which when mixed together form a solid, fully cured material, with no by-products. In cases where the conditions are not considered extreme, Electrolube offer a range of conformal coatings which provide a combination of protection in humid and corrosive environments with ease of application. They can be used for complete coverage or selective application onto the PCB, thus minimising the weight added as a result of applying a protective material.

Example of Mixing instructions for Encapsulation Resins

More Information

Encapsulation Resins


ER2188 - Black Epoxy Resin

Black Epoxy Resin

50g, 100g, 250g, 500g, 1000g, 5kg, 25kg

Product code: ER2188RP50G - ER2188RP100G - ER2188RP250G - ER2188RP500G - ER2188RP100G - ER2188K5K - ER2188K25K

ER2188 two part epoxy is a flame retardant, general purpose potting and encapsulating compound. Its a good all round resin offering a cost effective solution for a wide range of applications.

The system utilises a hardener free of DDM or other aromatic amines. The flame retardant technology used is of a 'clean' type leading to relatively low toxicity fumes and low smoke emission.

It exhibits excellent electrical properties and adhesion to a wide range of substrates while maintaining good chemical and water resistance.

Key Properties:
  • General purpose epoxy resin
  • Cost effective solution
  • Good chemical and water resistance
  • Excellent adhesion to a wide variety of substrates
  • Excellent electrical properties
  • UL94 V-0 approved
  • RoHS-2 Compliant

Additional information

Product data sheets
ER2188 (tds) Download
61-ER2188A-SDS699 (msds) Download
61-ER2188B-SDS701 (msds) Download