+61 (0) 2 9938 1566
Automotive Sensors
- Diesel / Fuel Resistant
- Corrosive Gas Resistant
- Salt Mist / Water Resistant
- Oil Resistant
- RF Friendly
- Stress Gauges
The modern vehicle has as many sensors on than a cold war jet fighter, monitoring everything from the obvious (eg. tyre pressures), to the things most drivers wouldn’t even consider (running speed of the engine). These sensors are exposed to a wide array of different conditions including some of the most hostile conditions (fuel sensors). It takes then, specialist materials in order to protect the device and maintain optimum operation. Electrolube has the bespoke solution for you.
More info >Electrolube have an extensive range of products suitable for all automotive application environments, we have collated a selection of products in a specialist brochure to aid your selection which can be viewed here:
Electrolube Automotive Applications brochure
Electrolube also have a number of articles and blogs which you may find useful in selecting the right material for your application
Read more about specific products for the Automotive market:
Articles
- Conformal Coatings for Automotive Applications
- Two Part Coatings Vs Traditional and UV Cure coatings: A Comparison
- Conformal Coating Vs Encapsulation Resins: which do I choose
- High Performance Resin Chemistries for the Electronics Industry
- Conformal Coatings: Condensation Testing, a new approach
- Thermal Management for LED applications: looking beyond the thermal conductivity value
Blogs
- Case Studies
- - Automotive LED Case Study
- - Case Study: the solution is not always Chemical
- - How Do Vehicles perform on all 7 continents in all-weather without fail?
- - Case Study: Beware the boards that ‘Bare all’
- Conformal Coatings
- - Selecting the right Coatings for Automotive applications
- Encapsulation Resins
- - Resins Past Present + Future
- - To Encapsulate or To Coat?
- - Selecting the right resin for the job
- - Resin Properties and their importance
- - Why do we use Resins?
- - Achieving the right Cure
- Thermal Management of Electronics
- - Phase Change Materials – a practical alternative
- - The Heat is On
- - Thermal Management for LEDs
- - Thermal Conductivity : The Facts
AFA
Aromatic Free Acrylic Conformal Coating
Excellent clarity, ideal for LED applications
CG71
Contact Grease
This contact lubricant is particularly applicable for the protection and cleaning of static and moving electrical arc interfaces
EGF
Eltinert F Grease
The Eltinert series of contact lubricants have been developed to provide superior protection
EOF
Eltinert F Oil
Developed to provide superior protection to electrical contacts under the most difficult conditions. These include extended periods at high temperatures and under corrosive chemical atmospheres.
ER1448
Specialist Radio Frequency Encapsulant
ER1450/ER1451
White / Clear Epoxy Resin
Fast curing, low viscosity resin which is tough once cured.
ER2183
Black Epoxy Resin
Medium viscosity, thermally conductive and flame retardant, two part encapsulating and potting compound
ER2223
High Temperature Resin
ER2223 black epoxy resin has been specially formulated to meet the harsh operating conditions of under-hood applications in the automotive industry.
ER2225
High Temperature Resistant Epoxy
Specialist epoxy potting compound for automotive industry electronics
SPG
Special Plastic Grease
Special Plastics Compatible Grease is a synthetic grease
UR5118
Black Polyurethane Resin
Low viscosity, two part encapsulating and potting compound with excellent resistance to sea water and good RF properties - good marine resin
UR5123
Thixotropic Polyurethane Resin
Ultra-high performance potting compound. Thixotropic - allows ingress under components and into tight gaps.
