Maintenance & Service Aids

A total solution for maintenance, repair and overhaul

Electrolube FRE freezer spray being used on a PCB
  • Syringes, pump sprays, tubes, aerosols, wipes, and pens
  • Air duster and freezer sprays
  • Cleaners and wipes
  • Greases and oils
  • Encapsulation resins and conformal coatings
  • Maintenance, test, repair and small scale production
  • Paints and galvanising sprays

Electrolube manufactures a wide range of maintenance products to complement the major product groups. Whether used by OEMs or subcontractors, these products are supplied in convenient packaging, covering a wide range of applications and requirements.

More info > Download product selector chart > Download product brochure >

Specific products in this range include:

  • Airdusters – For the removal of dust and dirt from hard to reach places, for example, in photographic and electrical equipment. They can also be used to blast off water or solvents for rapid drying.
  • Freezer Sprays – For the identification of faulty components by rapidly cooling components to -55°C. Freezers are available in standard or minimal charging forms, enabling safe use on static sensitive components.
  • General Maintenance – Including hard surface cleaners, cyanoacrylate adhesives, tamper evident seals and contact cleaner lubricants.
  • Industrial Maintenance – Including high quality paints, galvanising sprays, polyurethane foam, lubricants and graffiti removers.

Electrolube can provide a total solution for mobile mechanics and service engineers through the wide range available. Products are supplied in a range of packaging dependent upon their application and end use. These include aerosols, pump sprays, syringes, tubes, pens, sachets and small tins.

  • how to clean electrical contacts
  • Maintenance & Service Aids

    Paints and Paint Removers

    NSCP - Nickel Screening Compound PLUS

    NSCP
    Nickel Screening Compound PLUS

    400ml - 5 Litre

    Product code: NSCP400H - NSCP05L


    NSCP is an electrically-conductive coating based on nickel powder in a thermoplastic resin. It is an extremely efficient EMI/RFI screening coating. It will adhere to a wide variety of substrates and can be used to coat cabinets for a variety of electronic and electrical housings. The coating becomes touch dry 5 minutes after application and achieves maximum conductivity after 24 hours.


    Key Properties:
    • Efficient EMI/RFI screening coating
    • Enhanced adhesion to wide variety of substrates
    • Fast drying at room temperature
    • Also available in bulk

    Product data sheets
    NSCP (tds) Download
    NSCPT (tds) Download

    Log into our MSDS database for Safety Data Sheets: MSDS